Menu
Your Cart

FMC Cards

Product DescriptionFH1159 is a module that converts the FMC interface to one HDMI input and one HDMI output. The HDMI interface supports up to 4K@60Hz.FH1159 has a standard  FMC HPC interface that can be connected to the ALINX FPGA carrier board for use.Key Features● 1 x HDMI video output interface,..
$599.00
Product DescriptionFH1219 has 4 12G SDI interfaces, and each SDI can be configured as an input or output separately. Each SDI supports a maximum data rate of 11.88Gbps, and the input and output of four SDI video signals are connected to the HDBNC connector  through a 75 ohm wiring impedance. Adoptin..
$749.00
Product DescriptionFH1223 extends four SFPs, with each SFP having a set of TX and RX connected to the transceiver pins.FH1223 has a standard FMC HPC interface that can be connected to the ALINX FPGA carrier board for use.Key Features● 4 x SFP optical (The receiving and transmitting speed of fiber op..
$150.00
Product DescriptionFH1224 is a 2-channel 40G QSFP+ fiber optic module, with each fiber optic transceiver integrating 4 transmission channels and 4 reception channels. This 4-channel pluggable interface has a transmission rate of up to 40GbpsFH1224 has a standard FMC HPC interface that can be connect..
$195.00
Product DescriptionFH1226 is a 2-way Camera Link interface (SDR26). Supports three modes: Base, Medium, and Full. Using DS90CR288A chip, 4 pairs of LDVS serial data are converted into 28 bit parallel data, with a throughput of up to 2.38Gbps.FH1226 has a standard  FMC HPC interface that can be conne..
$599.00
Product DescriptionFH4020 is a high-performance OcuLink PCIe communication daughter card, specifically designed for FPGA development platforms, providing stable and high-speed data communication solutions. The product offers two standard SFF-8612 OcuLink interfaces, supports PCIe 3.0 protocol, and c..
$389.00
Product DescriptionThe FH6141 is an FMC-compatible interface module designed to convert one DisplayPort (DP) input and one DisplayPort output, compliant with the DP1.4 standard. Featuring 4-lane configuration, this module supports data rates up to ‌8.1Gbps per lane‌, delivering high-bandwidth video ..
$599.00
Product DescriptionFH7000 is a high-performance, broadband, and highly integrated RF sub card based on the VITA57.1FMC architecture.The board is based on the agile transceiver AD9371 as the processing core, suitable for application in general software wireless Electric platform. Electric platform.FH..
$2,097.00
Product DescriptionFH7621 is a module that converts the FMC interface to one HDMI2.1 input and one HDMI2.1 output, maximum support 8K@60Hz.FH7621 has a standard  FMC HPC interface that can be connected to the ALINX FPGA carrier board for use.Key Features● FMC HPC connector ● 1 x HDMI 2.1 video outpu..
$1,947.00
Product DescriptionFH7622 is a module that converts the FMC interface to two HDMI2.1 input , HDMI interface maximum support 8K@60Hz.FH7622 has a standard  FMC HPC interface that can be connected to the ALINX FPGA carrier board for use.Key Features● FMC HPC connector ● 2 x HDMI 2.1 video input interf..
$1,947.00
Product DescriptionFH9000 is a high-performance, broadband, and highly integrated RF sub card based on the VITA57.1FMC architecture.The board is based on the agile transceiver ADRV9009 as the processing core, suitable for application in general software wireless Electric platform.FH9000 has a standa..
$3,250.00
Product DescriptionThe FH9600 is a high-performance, radio frequency FMC card based on the ADRV9025A transceiver, covering 75 MHz to 6 GHz with 4Tx/4Rx channels, offering up to 450 MHz TX and 200 MHz RX bandwidth for applications in 5G, MIMO, radar, and communications.Applications● 3G/4G/5G TDD and ..
$3,714.00
Product DescriptionThe FH9656 is a VITA57.1-compliant 8-channel 16-bit AD acquisition FMC card with 125 MSPS sampling rate. It features high-bandwidth FPGA connectivity via FMC-HPC for low-latency data transfer and supports multi-board synchronization. Ideal for radar, communications, and test measu..
$4,493.00
Product DescriptionFH9681 is an FMC card compliant with the VITA57.1 standard, featuring a JESD204B (Subclass 1) interface. This subcard provides 4 channels of 14-bit ADC acquisition with a fixed sampling rate of 1 GSPS. The ADC device utilizes the GMS011 chip from CETC24, which is fully compatible ..
$5,242.00
Product DescriptionFH9712 is a 16 channel GMSL2/GMSL1 camera acquisition module, which uses 4 MAX96712 decoder chips to achieve 16 channel camera video decoding.The interface adopts a four in one FAKRA vehicle standard coaxial connector.FH9712 has a standard  FMC HPC interface that can be connected ..
$2,696.00
Product DescriptionFL0214 is a 2-way 13 megapixel CMOS camera module with MIPI interface. The camera module adopts a CMOS photosensitive chip IMX214.FL0214 has a standard  FMC LPC interface that can be connected to the ALINX FPGA carrier board for use.Key Features● Photosensitive Chip: SONY IMX214● ..
$329.00
Product DescriptionFL1010 is an FMC to dual pin module, with 2 standard interfaces of 40 pins extended on the board, for a total of 68 user IO; And 6 SMA interfaces for connecting FMC transceivers. Solve the IO port for users to expand the pin method on FMC connectors, making it convenient for users..
$75.00
Product DescriptionThe FL1010V is a flexible FMC mezzanine card for FPGA development, featuring 68 user I/Os with selectable 1.8V/3.3V/5V levels, dual SMA clock inputs, and VITA57.1 compliance.FL1010V has a standard FMC LPC interface that can be connected to the ALINX FPGA carrier board for use.Appl..
$90.00
Product DescriptionThe FL1042 is a 20-channel CAN FD (Controller Area Network with Flexible Data-Rate) communication module designed for high-speed, high-reliability data transmission. It connects to external signals via a DB44 female header connector and supports jumper-configurable termination res..
$749.00
Product DescriptionFL1404 is an FMC to 4-way MIPI module that solves the problem of users expanding 4-way MIPI on FMC connectors, making it convenient for users to connect MIPI cameras or MIPI LCD screens through FPC ribbon cables. Each MIPI is an LANEx 4 interface, with a speed of up to 2.5Gbps.FL1..
$150.00
Showing 1 to 20 of 36 (2 Pages)